Products

<< Return

Forged Swivels

  • Hot dip galvanized
  • Quenched & Tempered
  • Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Chain Swivels

  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 1, except for those provisions required of the contractor.
Size
(in.)		 G-401
Stock #		 WLL
(lbs.)		 Wgt.
Each
(lbs.)		 Dimensions (in.)
A B C D E G J M R U V
1/4 1016233 850 .13 1.25 .69 .75 .62 1.12 .25 .69 .31 2.25 1.69 1.25
5/16 1016251 1250 .25 1.63 .81 1.00 .75 1.38 .31 .81 .38 2.72 2.06 1.47
3/8 1016279 2250 .54 2.00 .94 1.25 1.00 1.75 .38 1.00 .50 3.44 2.50 1.88
1/2 1016297 3600 1.12 2.50 1.31 1.50 1.25 2.25 .50 1.31 .63 4.25 3.19 2.44
5/8 1016313 5200 2.09 3.00 1.56 1.75 1.50 2.75 .62 1.50 .75 5.13 3.88 2.94
3/4 1016331 7200 3.09 3.50 1.75 2.00 1.75 3.25 .75 1.88 .88 5.78 4.94 3.46
Regular Swivels

  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 2, except for those provisions required of the contractor.
Size (in.) G-402 Stock
#		 WLL (lbs.) Weight
Each (lbs.)		 Dimensions (in.)
A B C D J M R S
1/4 1016019 850 .21 1.25 .69 .75 1.06 .69 .31 2.94 1.69
5/16 1016037 1,250 .39 1.63 .81 1.00 1.25 .81 .38 3.56 2.06
3/8 1016055 2,250 .71 2.00 .94 1.25 1.50 1.00 .50 4.31 2.50
1/2 1016073 3,600 1.32 2.50 1.31 1.50 2.00 1.31 .63 5.44 3.19
5/8 1016091 5,200 2.49 3.00 1.56 1.75 2.38 1.50 .75 6.56 3.88
3/4 1016117 7,200 4.02 3.50 1.75 2.00 2.63 1.88 .88 7.19 4.31
7/8 1016135 10,000 6.25 4.00 2.06 2.25 3.06 2.13 1.00 8.38 5.00
1 1016153 12,500 8.95 4.50 2.31 2.50 3.50 2.38 1.13 9.63 5.75
1-1/4 1016199 18,000 16.37 5.63 2.69 3.13 3.69 3.00 1.50 11.44 6.75
1-1/2 1016215 45,200 45.79 7.09 3.88 4.09 3.88 3.75 2.25 16.69 9.91
Jaw End Swivels

  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 3, except for those provisions required of the contractor.
Size
(in.)		 G-403
Stock #		 WLL
(lbs.)		 Wgt.
Each
(lbs.)		 Dimensions (in.)
A B C G J K L M N P R U V
1/4 1016395 850 .21 1.25 .69 .75 .69 .69 .47 1.03 .31 .88 .25 2.63 1.69 1.69
5/16 1016411 1,250 .34 1.63 .81 1.00 .81 .81 .50 1.13 .38 .88 .31 2.94 2.06 1.81
3/8 1016439 2,250 .66 2.00 .94 1.25 1.00 1.00 .63 1.41 .50 1.06 .38 3.63 2.50 2.25
1/2 1016457 3,600 1.34 2.50 1.31 1.50 1.31 1.31 .75 1.75 .63 1.31 .50 4.50 3.19 2.88
5/8 1016475 5,200 2.48 3.00 1.56 1.75 1.63 1.50 .94 2.06 .75 1.50 .63 5.31 3.88 3.44
3/4 1016493 7,200 3.88 3.50 1.75 2.00 1.88 1.88 1.13 2.53 .88 1.75 .75 6.06 4.31 4.00
7/8 1016518 10,000 5.87 4.00 2.06 2.25 2.13 2.13 1.19 2.75 1.00 2.06 .88 7.00 5.00 4.53
1 1016536 12,500 9.84 4.50 2.31 2.50 2.63 2.38 1.75 3.72 1.13 2.81 1.13 8.56 5.75 5.94
1-1/4 1016572 18,000 15.75 5.69 2.69 3.13 3.13 3.00 2.06 4.31 1.63 2.81 1.38 9.75 7.06 6.38
1-1/2 1016590 45,200 54.75 7.00 3.88 4.00 5.63 4.00 2.88 6.00 2.25 4.44 2.25 14.25 10.00 10.84
Back To Top